RC walls in Australia: displacement-based seismic design in accordance with AS 1170.4 and AS 3600

Displacement-based methods, such as a non-linear static pushover analysis (e.g. the capacity spectrum method), have many advantages compared to traditional force-based design methods. However, implementing a non-linear analysis and design method in accordance with the Australian Standard for concrete structures (AS 3600) introduces many difficult technical issues into the design, of which the standard provides little guidance. The aim of this study is to provide a framework and general guidance for designers who wish to perform non-linear displacement-based analysis methods for RC wall buildings. The paper will present how these methods can be used in accordance with the Australian Standard for earthquake actions (AS 1170.4) to assess seismic compliance and then provide recommendations for the requirements stipulated by AS 3600, which includes an experimentally validated tension stiffening model, nonlinear stress-strain material curves, mean material properties and material strain limits. The paper is concluded with a case study example of how a displacement-based seismic assessment can be performed using a typical case study building.